Spacer for Mounting Press: Placed inside the mold cavity to separate two specimens, enabling dual samples to be pressed in one cycle. It prevents samples from sticking together and controls the forming height of mounts.

Upper Plug for MT-1H Mounting Press: During hot mounting, it moves down with the pressure mechanism to apply pressure to the specimen and mounting resin inside the molding sleeve, compacting and curing the mounting compound to form the metallographic specimen.

Upper Plug for FlexPRESS Mounting Press: During hot mounting, it is pressed down by the pressure mechanism to apply pressure on the specimen and mounting compound inside the molding sleeve, so as to compact the mounting compound and form the metallographic specimen.

The lower plunger is at the bottom of the sleeve. It serves as the bottom support of the mold. Together with the sleeve and upper plunger, it forms a closed cavity to support the sample and mounting compound. It bears pressure during heating and compression, and allows easy ejection of the specimen after molding.

The sleeve of the mounting press is the main part of the hot mounting die. Used together with the upper and lower plungers, it forms a closed cavity. The sample and mounting compound are placed inside the sleeve. Under heating and pressure, the mounting compound solidifies and encapsulates the sample to form a standard metallographic specimen block for subsequent grinding, polishing and inspection.